Aerial Runways

PRODUCT CODE: MAR01


Specifications

Easy Adjust Aerial Runway (25 to 30 metres)

 

The standrad Single Seat Aerial Runway is designed for 25-30m distances, but can also be adapted for shorter distances.

 
The aerial runway is one of the simplest designs for this type of equipment. It consists of two posts leaning into one another with two tensioning bars behind. 
The 10mm cable runs on large pulley wheels to reduce the risk of the the cable fraying. All anchor points are hidden inside the post and are tamper free.
 
The simple design with no additional steel frames and supports allows the unit to harmonise with the background rather than dominate. Effective spring bump stops at each end of the runway.
 
The carriage is made of Stainless steel and rubber. The tamper proof tensioning system is simply adjusted using a large socket and rachet.
 
The installation of the equipment is inexpensive and straightforward.
  • End Posts: 150mm heavyweight posts - Galvanised finish
  • Strainer Bars: 60mm heavyweight tube with adjustable rigging screws - Galvanised finish
  • 10mm High Tensile Cableway
  • Optional start platform
  • New rubber body carriage for lower maintenance and impact damage.
  • Tensioning Mechanism
  • Our unique tensioning system is hidden within the top support post and is accessed by a removable
  • cover plate. A socket and ratchet are required to turn the screw which in turn tensions the cable.
  • Simple to adjust and only requires one person.
  • The hidden tensioner allows a very simple, but elegant overall design that will enhance your play area
  • or park. There is a minimum amount of installation required with the single posts and ongoing maintenance
  • remains low.
  • All galvanised steelwork comes with a 5 year guarantee against corrosion and a 10 year metalwork guarantee against structural failure*. Galvanising to EN ISO 1461:1999.
  • Manufactured to conform to BS EN 1176.